Friday, January 22, 2021

CAEN x1081 Programmable Logic Units

Coincidence, Trigger Logic, Counter, Pulse Generator and more

The DT1081A and N1081B are the new CAEN pocketknife tools that incorporate in a single module the most common functionalities that you need to implement the logic capabilities of your laboratory setup. Whenever you are in need to rapidly configure and perform multiple logic operations at a time, the x1081 is your supporter thanks to its flexibility.
Coincidence, scaler, timer, pulse generator, time stamper, Leading Edge Discriminator (Coming Soon) are only a small portion of the possible functions that can run on the four independent sections of the board. All this is achievable with just a few taps on the touchscreen display while a web interface is available to allow remote control via USB and Ethernet. NIM format is suitable to replace old-style crate analog electronics while the Desktop is its handy evolution to ease working at small benchtop setups.

>>> Click to start video <<<

The CAEN N1081A is a laboratory tool that incorporates in a single NIM module the most common functionalities that you need to implement the logic capabilities of your experiment.

The module is organized in four sections, with 6 inputs and 4 outputs each (selectable impedance) accepting TTL/NIM signals. Each section is configurable independently according to one of the available pre-programmed functions, like scaler, counter, time stamping, digital pulse generator, etc. The section programming can be done using the 2.8” touch screen display or via the web-interface. Each section integrates a discriminator with programmable threshold and an asynchronous Gate & Delay with 5ns resolution. This allows the user to trim at best the needed parameters and to perform accurate measurements.

Click here for more details!


No comments:

Post a Comment

Subscribe to eNewsTronix